If you iphone screen is broken, when we encounter this problem, we don't know how to do, even if someone wants to diy, but also do not know what tools to fix. Now vipprog can introduce you some tools and solutions to fix your iphone. Maybe you can fix back well your iphone.
Now you have the tools that to repair your iPhone screen, let's follow me to begin your fix. Step1 Back up your data The first step is to back up all the iPhone's data using iCloud or iTunes, just in case wrong. You'll also need to eject the SIM card using the eject tool or a paper clip. Step2 Remove the back cover You can open the iPhone by removing the two screws located on the bottom edge.As noted above, you'll need a special pentalobe screwdriver for this task. Then, slide the back cover upward and lift it off. Step3Remove the internal hardware Before installing the new display assembly, you'll need to remove most of the iPhone's internal hardware, starting with the battery. Step4 Remove the broken display assembly Finally, we can turn our attention to the broken display assembly. It's held to the metal frame with 10 screws: 3 each along the two sides and 1 in each corner. You'll need to remove them all, keeping track of the washers under the 6 side screws. Step4 Install the new display assembly
Step5 Rebuilt the iPhone To Rebuilt the phone, Please rework through the previous steps. Start with the vibration motor, then install the speaker assembly, motherboard, rear camera, motherboard shields, battery, and finally the back cover, Finally check your iphone and rework it.